Skip to main content

Push Button

Push Buttons are the default button type and require a single touch-cycle to trigger an output.

In cases where a command needs to be actioned repeatedly and in quick secession, a Tap Button may be better suited.

Action Map

The action map below details the point at which commands are sent:

Touch ReadyTouch BegunTouch HoldTouch ReleaseTouch End
XXXOn ModeX

Control Methods

TypeOn ModeOff Mode
MIDIMIDI Channel, Note, VelocityN/A
OSCOSC Message, PatchN/A
HTTPHTTP Address, PatchN/A
TCPTCP String, PatchN/A
UDPUDP String, PatchN/A
sACNsACN Patch, Channel, ValueN/A
AudioAudio ID, VolumeN/A
VideoVideo, Layer, Volume, Scale X, Scale Y, Position X, Position Y, OpacityN/A

API Methods

Use external applications to operate this control with the API via OSC.

Send the string /ctrl/control/[uid]/[command] with the control's UID and selected command.

The default port for Ctrl for iPads OSC API is 53000. This can be modified by navigating to the settings menu and modifying the global OSC input port.

Command
/enabled [Int]Enable or disable the control (0 - Disabled, 1 - Enabled)
/theme [Int]Change the theme of the control (Int 1 to 14)
/theme [Int] [String]Change the theme of the control using custom palette
/label [String]Change the label of the control for the session name (Int 1 to 14)
/flash [Int]Set the control to flash to indicate attention is required (0 - Off, 1 - On)

Alternatively, you can create a Custom OSC Binding for this control for any of the attributes listed above.